Salt Lamp Care

We want your salt products to be worth every penny, and if you take good care of them they can last a lifetime! Read on for some important information about salt lamp care.

Our salt lamps are intended for indoor use only. We do not recommend using them anywhere in the home where there are large amounts of moisture ie. bathrooms, window sills etc.

It is advisable to place your lamp on a plate or mat to avoid leaving marks on your furniture.

It is recommended that you leave the lamp on continuously when someone is at home to get the maximum benefit from your lamp.

Occasionally, it is recommended that you turn off and unplug your salt lamp for an hour, let it cool and then gently rub with a damp cloth to clean trapped dust and particles. DO NOT wash or apply any cleaning products to your lamp.

A lamp that is NOT ON will absorb moisture and humidity from the surrounding air and will become slightly damp, sweat or leak a little water. If this happens, leave your lamp in strong sunlight to completely dry out, wipe gently with a cloth and turn the lamp back on. As a precaution, if you are going away for a long period of time, we recommend you turn your lamp off, remove the power cord and bulb, and wrap the lamp tightly with cling-film or a plastic bag until you return to prevent it absorbing moisture.

Warning: The lamps are electrical devices and should not be used in baths or near water.

NB: to replace the bulb. Turn the lamp OFF at the mains outlet. Unscrew the fitting from the metal collar – do not pull the cable. We recommend using a 15w E14 Pygmy ‘oven’ bulb.

To view our selection of Himalayan salt products, you can visit our store!